12
ENGLISH
ENG
D Tools with SDS-Plus shank
E Connecting piece
F Geared chuck
G Twist drills for metal and wood
H Screwdriver bit
I Special grease (for lubricating the tool
shanks)
For complete range of accessories, see
www.metabo.com or the main catalogue.
Repairs to electrical tools must be carried out
by qualified electricians ONLY!
If you have Metabo electrical tools that require
repairs, please contact your Metabo service
centre. For addresses see www.metabo.com.
You can download spare parts lists from
www.metabo.com.
Scrap power tools and accessories contain large
amounts of valuable resources and plastics that
can be recycled.
Battery packs must not be disposed of with regular
waste. Return faulty or used battery packs to your
Metabo dealer!
Do not allow battery packs to come into contact
with water!
Explanatory notes on the specifications on
page 2.
Changes due to technological progress reserved.
U = Voltage of battery pack
Ah = capacity of the battery pack
m=Weight
n
1
= No-load speed
ø
max.
= maximum solid drill diameter
s
max.
= maximum impact rate
W = Single impact force
During operation the noise level can exceed
80 dB(A).
Wear ear protectors!
The technical specifications quoted are subject to
tolerances (in compliance with the relevant valid
standards).
12 Repairs
13 Environmental Protection
14 Technical Specifications
17026826_0411 KHA 24 NAFTA.book Seite 12 Mittwoch, 20. April 2011 9:27 09
To Next Page
Loading...
Need help?
General