Guide - To teardown the keyboard
To clean up spills, assuming you have not flipped the keyboard over after the spill, then you can
clean up the spill by removing the keys only (see section on key removal). Instructions below are for
full disassembly.
Step 1 Remove rubber feet
Flip the keyboard over and remove the rubber feet using a small flat screwdriver to reveal the
hidden screws.
Step 2 Remove screws from back
Once all rubber feet removed, using a small Philips screwdriver, unscrew the 5 screws on the back,
the bottom screws secure the wrist pad.
To Next Page
Loading...
Need help?
General