11
COUNTERTOP INSTALLATION
Remove all packing material and accessories.
Examine the oven for any damage such as dents or broken door.
Do not install if oven is damaged.
Cabinet: Remove any protective film found on the microwave oven
cabinet surface.
1. Select a level surface that provide enough open space for the intake
and/or outlet vents (Figure 1).
A 10-cm spacing should be kept between the appliance and right and
back walls, and a 30-cm spacing kept on the top. Never dismantle the
applicance's feet, nor block the air intake and exhaust opening.
The left side must be open.
1) Blocking the intake and/or outlet openings can damage the oven.
2) Place the oven as far away from radios and TV as possible.
Operation of microwave oven may cause interference to your radio or
TV reception.
3) Plug your oven into a standard household outlet. Be sure the voltage
and the frequency is the same as the voltage and the frequency on the
rating label.
4) Warning: T he plug socket,electric appliances or the appliance which
are liable effected by heat and moisture should be kept away from any
vents on the oven.
Installation
Fig 1
OPEN
4.0 inch (10cm)
12 inch (30cm)
4.0 inch (10cm)
To Next Page
Loading...
Need help?
General
