EasyManuals Logo
Home>Midea>Air Handlers>DLFLAA

Midea DLFLAA User Manual

Midea DLFLAA
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
2 Specifications subject to change without notice. 32802002001
A NOTE ABOUT SAFETY
Any time you see this symbol in manuals, instructions and on
the unit, be aware of the potential for personal injury. There are 3
levels of precaution:
1. DANGER identifies the most serious hazards which will result in
severe personal injury or death.
2. WARNING signifies hazards that could result in personal injury or
death.
3. CAUTION is used to identify unsafe practices which could result
in minor personal injury or product and property damage.
NOTE is used to highlight suggestions which will result in
enhanced installation, reliability, or operation.
GENERAL
The Air Handler fan coil unit provides quiet, maximum comfort. In
addition to cooling and/or heating, the Air Handler fan coil unit
matched with an outdoor condensing unit filters and dehumidifies
the air in the room to provide maximum comfort.
IMPORTANT: The Air Handler fan coil unit should be
installed by authorized personnel only; using approved tubing
and accessories. If technical assistance, service or repair is
needed, contact the installer.
The Air Handler fan coil unit can be set up and operated from
the remote control (provided).
Operating Modes:
The Air Handler fan coil unit has four operating modes:
FAN ONLY
AUTO
• HEATING
• COOLING
FAN ONLY
In the FAN ONLY mode, the system filters and circulates the
room air without changing room air temperature.
AUTO
In the AUTO mode, the system automatically cools or heats
the room according to the user-selected set point.
NOTE: AUTO mode is recommended for use on single zone
applications only. Using Auto changeover on multi-zone
applications could set an indoor unit to STANDBY mode,
indicated with two dashes (--) on the display, which turns off
the indoor unit until all the indoor units are in the same mode;
either COOLING or HEATING.
HEATING is the system’s priority mode.
Simultaneous HEATING and COOLING is not allowed.
HEATING
In the
HEATING
mode, the system heats and filters the room air.
COOLING
In the COOLING mode, the system cools, dries and filters the
room air.
PERSONAL INJURY, DEATH AND / OR PROPERTY
DAMAGE HAZARD
Failure to follow this warning could result in personal injury, death or
property damage.
Improper installation, adjustment, alteration, service, maintenance, or
use can cause explosion, fire, electrical shock, or other conditions
which may cause personal injury or property damage. Consult a
qualified installer, service agency, or your distributor or branch for
information or assistance. The qualified installer or service agency
must use factory-authorized kits or accessories when modifying this
product.
Read and follow all instructions and warnings, including labels
shipped with or attached to unit before operating your new air
conditioner.
WAR N I N G

Other manuals for Midea DLFLAA

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Midea DLFLAA and is the answer not in the manual?

Midea DLFLAA Specifications

General IconGeneral
BrandMidea
ModelDLFLAA
CategoryAir Handlers
LanguageEnglish

Related product manuals