Page 19
6
Remote Control Operating
Instructions
Remote Control Specifications
Function Buttons
Before you begin using your new air conditioner, make sure to familiarize yourself with
its remote control. The following is a brief introduction to the remote control itself.
For instructions on how to operate your air conditioner, refer to the How to Use Basic
Functions section of this manual.
Operating
Instructions
(With Remote)
Model RG57H2(B)/BG(C)EF
Rated voltage 3.0V (Dry batteries R03/LR03x2)
Signal receiving range 8 m
Environment -5°C ~ 60°C (23°F ~ 140°F)
FAV.
Sets and activates your favorite pre-settings.
temperature
temperature
Increases temperate in 1°C (1°F) increments.
Max. temperature is 30°C (86°F).
TIMER ON
Sets timer to turn unit on (see How to Use
Basic Functions for instructions)
TIMER OFF
Sets timer to turn unit off (see How to Use
Basic Functions for instructions)
LED
Turns indoor unit s LED display on and off.
If you are sensitive to light when you go to
sleep, you can press the LED button to turn
off the LED display on the unit. Press the
button again to turn it back on.
FOLLOW ME
Temperature sensing and room
temperature display button.
Increases temperate in 1°C (1°F) increments.
Max. temperature is 17°C (62°F).
NOTE: Press and hold and buttons
together for 3 seconds will alternate the
temperature display between the °C & °F scale.
Turns the unit on or off.
MODE
Scrolls through operation modes
as follows:
AUTO COOL DRY HEAT FAN
NOTE:
Please do not select HEAT mode
if the machine you purchased is
cooling only type. Heat mode is
not supported by the cooling
only appliance.
FAN SPEED
Selects fan speeds in the
following order:
AUTO LOW MED HIGH
SLEEP
Saves energy during
sleeping hours.
SWING
Starts and stops
louver movement.
NOTE
Swing, and Follow me features are optional. RG57H1(B)/BG(C)E-M without med
fan speed.
mode
fan
fav.
Auto
Auto Set Temp.
temperature
sleep swing follow me LED
To Next Page
Loading...
Need help?
General
