Service Manual_2020-V1.0
55
7.15 Waterway system（Option）
Disassembly of filter built-in
Built-in filter is located in top right corner of the
refrigerator.
1) Press the place of sign at both sides of the filter cover
with hand, pull down in the direction of the arrow, and
open the filter cover;
2) Rotate in anti-clockwise direction, remove the filter
element for replacement;
Remark: please turn off the waterway during filter
element disassembly (turn off the tap water).
3） If filter cover disassembly is required, it is necessary
to remove 2 screws in the red circle, and then use
strength to unplug downward.
To Next Page
Loading...
Need help?
General
