Basic parameters
358X293X1600mm
Dimensions
GZ20D2W
Product name
Garment steamer
220-240V~
2000W
2.0L
Model
Power
Water tank capacity
Weight
Voltage
7kg
Frequency
50/60Hz
Safety Protection
Cleaning and Storage
10
1. Temperature detection protection: The Garment Steamer is equipped with
a built-in temperature sensing element. When there is abnormal temperature,
the temperature sensing element will emit signals to control the connection
and disconnection of the heating element, thus keeping the product
temperature within a suitable range.
2. Thermal fuse protection: The garment steamer is provided with a thermal fuse.
When a temperature is abnormal and the thermostat fails, it switches off directly
to avoid any accident.
3. Dry Boil protection: Water insufficiency alert and automatically cut power if boil
dry. When the pump is boiling without water, the alarm buzzer will work immediately.
Meanwhile, power will be cut off after the indicator blinks three times to protect
the garment care.
1. Press the "On/Off" buttom to close the garment steamer.
3. After cooling the product for 30 minutes, open the water tank cover, lift and tilt the
product, and pour out the water inside the product from the water tank cover.
4. Unscrew the drain plug counter-clockwise, the water in the principal machine will
outflow from the drain plug. (Note: Clear the accessories of the product before
unscrew the drain plug in case the water flows out of the principal machine gets
the goods wet.)
5. After using the product for a long time, we suggest cleaning off the water scale
regularly to avoid impurities of water stain the clothing: disassemble the airway
tube from the main body and fill the water into the water inlet and shake the
machine. Then pour out the dirty mixture along with water from the water outlet.
The performance will be better when repeating above steps.
6. After winding the power cord and air duct, put the product in a free place.
2. Disconnect the power plug.
To Next Page
Loading...
Need help?
General
