9. OPERATION
To start/stop operation
Press the Power button.
Operation lamp
Air conditioner ON :Lit brightly
Air conditioner OFF:Not lit
To set the operation mode
Press the Mode button to set the operation mode.
(Heat function is invalid for cool only type unit)
Room temperature setting
Press the button“ + ”or “ - ” to set the room temperature.
Indoor Setting Temperature Range : 17~30℃(62~86℉)
Lower Rise
Operation mode setting
16
6
Remote signal receiving function
The wired remote controller can be a remote signal receiving device, you can use the
wireless remote controller to control the air-conditioner through the wired remote
controller when the system have been powered on.