9
3. Press “FAN SPEED” button to select high/mid/low/auto.
4. Press “ON/OFF” button, indoor unit operation lamp on, it works in selected mode.
Press “ON/OFF” button again, it stops to work.
Remark: When in fan mode, no temperature can be set.
DRY OPERATION
1. Press “ MODE “ button, select “ DRY “ mode.
2. Press temperature adjust button to select setting temp.
3. Press “ ON/OFF “ button, indoor unit operation lamp on, it works in dry mode. Press
ON/OFF button again, it stops to work.
4. In dry mode, economy operation and fan speed are ineffective.
TIMER SETTING
Timer on only:
1. Press “ TIME ON “ button, it display “TIMER” on LCD, and display “ h “ and “ON” , it
is waiting for timer on setting.
2. Press “ timer “ on button repeatedly to adjust time setting.
3. If press this button and hold on, the time will increase at 0.5h, after 10h, it increase
at 1h.
4. After setting 0.5 second, the wire controller send timer on information, it is nished.
Timer off only:
1. Press “TIME OFF “ button, it display “TIMER” on LCD, and display “ h “ and “OFF”,
it is waiting for timer on setting.
2. Press “TIME OFF” button repeatedly to adjust time setting.
3. If press this button and hold on , the time will increase at 0.5h, after 10h, it increase
at 1h.
4. After setting 0.5 second, the wire controller send timer off information, it is nished.
TIMER ON AND TIMER OFF BOTH
1. Set timer on time as the corresponding step1 and 2.
2. Set timer off time as the corresponding step1 and 2.
To Next Page
Loading...
Need help?
General
