Ice box
Remote control
Water tank 2
Water tank 1
Honeycomb Filter Frame
Control panel
Air outlet
Wheels
Structural Diagram
1. Unfold the package and take out the air cooler,put it on the ground.
2. Check out the spare part.
3. Install the universal wheel: take out the universal wheel and install it on the air cooler.
Pay attention to the Water line when watering. (Fig.3)
Attention
When watering, the water must not be higher than the “MAX” water line.
Installation and Use
Add water from top: rotate water tank's top cover, fill in water (FIG 1).
Ice box placed in the foam inside box.
Fill in water tank form bottom: hold filter support's handle, rotate to outside till seperate
4. Add water:
filter support from unit (FIG 1), when water tank spotted, fill in water (FIG 2).
When humidifying, the water must not be lower than the “MIN” water line.
Perfume box
To Next Page
Loading...
Need help?
General
