10
Caster Installation
1
3
2
4
Pull out the side access tank.
Tilt the unit on its side and
hold it with one hand, then
insert two casters.
Leave the unit
standing up for half
an hour before use.
Rotate the unit and hold it with one hand, then
insert the other two casters.
Take out a cushion pad and four casters from the bucket, then reinstall
the side access tank.
Caster (4 pc)Cushion pad (1 pc)
Before inserting
Correctly inserted
• Take out the bucket, drain the water outlet and reinstall the plastic cover before installing casters.
• The tilt angle is not to exceed 30 degrees when installing casters, and all casters MUST BE installed
within 5 minutes.
• After the caster installation is complete, set the unit upright and rest for 30 minutes before starting the unit.
WARNING
Step 1
Step 2
Fig. 3
Fig. 4
To Next Page
Loading...
Need help?
General
