Store the unit when not in use
NOTE
12hours
Step6
Step 3
Step4
Step 1
Step 2
Step 5
*Please refer to the actual
plug, and the legend is for
reference only.
*Drain the unit‘s water collection
tray then reinstall the bottom
drain plug back in.
25
• Be sure to store the unit in a cool, dark place. Exposure to direct sunshine or
extreme heat can
shorten the lifespan of the unit.
• The cabinet and front may be dusted with an oil-free cloth or washed with a
cloth dampened
in a solution of warm water and mild liquid dishwashing
wipe dry. Never use harsh cleansers, wax or
excess water from the cloth
controls
detergent. Rinse thoroughly and
polish on the cabinet front. Be sure to wring
before wiping around the controls. Excess water in or around the
may cause damage to the unit.
Step 1: Drain the unit’s water collection tray according to the instructions in the following section.
Step 2: Run the appliance on FAN mode for 12 hours in a warm room to dry it and prevent mold.
Step 4: Clean the machine.
Step 6: Remove the batteries from the remote control.
Step 3: Turn off the appliance and unplug it.
Step 5: Clean the air filter according to the instructions in the previous section. Reinstall the clean,
dry filter before storing.
SWING
C-SENSE
°C/°F
To Next Page
Loading...
Need help?
General
