25
Handling the Remote Control
NOT SURE WHAT A FUNCTION DOES?
Refer to the Operating Instructions section of this manual for a detailed description of the
functions available using the remote.
NOTICE
Button designs on your unit may differ slightly from the example shown.
If the unit does not have a specific function, using that function’s button on the remote
control will have no effect.
INSERTING AND REPLACING BATTERIES
Your air conditioning unit comes with two AAA batteries.
Insert the batteries in the remote control before use.
1. Slide the back cover of the remote control downward,
exposing the battery compartment.
2. Insert the batteries, paying attention to align the (+) and
(-) ends of the batteries with the symbols inside the
battery compartment.
3. Slide the battery cover back into place.
BATTERY DISPOSAL
Ensure used batteries are disposed of properly.
TIPS FOR USING REMOTE CONTROL
• The remote control must be used within 26 feet / 8 meters
of the unit.
• The unit will beep when it receives a signal from the remote.
Curtains, other materials and direct sunlight can interfere
with the IR signal receiver.
• In order to properly transmit a command, the ON/OFF
indicator must be illuminated on the remote’s display. (See
the Remote LED Screen Indicators section for more
information.)
BATTERY NOTES
For optimum product performance:
• Do not mix old and new batteries, or batteries of
different types.
• Do not leave batteries in the remote control if you don’t
plan on using the device for more than 2 months.
To Next Page
Loading...
Need help?
General
