24
REMOTE CONTROL AND APP INSTRUCTIONS
Remote Control Specifications
Function Buttons
Before you begin using your new air conditioner, make sure to familiarize yourself with its
remote control. The following is a brief introduction to the remote control itself. For
instructions on how to operate your air conditioner, refer to the Operating Instructions
section of this manual.
COMFORTSENSE
Turns the ComfortSense feature on and off.
SHORT CUT
Sets and activates your favorite pre-settings.
Turns the unit on or off.
TEMP
Increases temperature in 1° increments.
Max. temperature is 86°F (30°C).
TIMER ON
Sets timer to turn unit on.
TIMER OFF
LED
Turns the AC’s LED display on and off.
SWING
Starts and stops
louver movement.
SLEEP
Saves energy during
sleeping hours.
TEMP
Decreases temperature in 1° increments.
Min. temperature is 60°F (16°C).
NOTE: Pressing and holding and buttons
together for 3 seconds will alternate the
temperature display between the °F & °C scale.
Selects fan speeds in the
following order:
AUTO LOW MED HIGH
MODE
Scrolls through operation modes
as follows:
AUTO COOL DRY HEAT FAN
NOTE:
Please do not select HEAT mode
if the machine you purchased is
cool-only type. Heat mode is not
supported by cool-only models.
ON/OFF
FAN SPEED
C-SENSE
FAN
Sets timer to turn unit off.
Model
Rated voltage
Signal receiving range
Environment
RG57H4(B2)/BGCEU1
3.0V (Dry batteries R03/LR03x2)
26 ft. (approx. 8 m)
23°F ~ 140°F (-5°C ~ 60°C)
To Next Page
Loading...
Need help?
General
