15
This air conditioner is designed to be operated under the following conditions:
Air Conditioner Features (general)
WARNING
To reduce the risk of fi re, electrical shock, or injury to people or property, read the SAFETY PRECAUTIONS
before operating this appliance.
Cooling Operation
Outdoor temperature: 64°F ~ 109°F / 18°C ~ 43°C
Indoor temperature: 62°F ~ 90°F / 17°C ~ 32°C
• The relative humidity of the room should be less than 80%. If the unit is used in a condition with a relative
humidity over 80%, there will be condensed water on the surface of the unit.
• Performance may be reduced outside of these operating temperatures.
NOTE
Air Conditioner Features
Air Directional Louvers
Always wait 3 minutes when turning the unit off and then on again, or when changing from cool to fan and back
to cool. This prevents damage from occurring to the compressor.
NOTE
To begin operating the air conditioner, follow these steps:
1. Plug in the air conditioner (be sure to follow the power cord instructions).
2. Turn the power on to the air conditioner, using the ON/OFF button.
3. Set the thermostat to the coldest temperature setting.
4. Select the Cool mode setting.
5. Adjust the louver for comfortable air fl ow (see Air Directional Louvers).
6. Once the room has cooled, adjust the thermostat to the setting you fi nd most comfortable.
7. Make sure the air fl ow inside and outside is not obstructed by anything.
The louvers will allow you to direct the air fl ow
Left or Right, or Up and Down (optional on some
models) throughout the room as needed.
Move the Levers from side to side until the
desired Left/Right direction is obtained.
You can also move the LEFT lever to adjust air
fl ow up/down as needed.
Levers
Air Direction
To Next Page
Loading...
Need help?
General
