7
PRODUCT INSTALLATION
Window Requirements
WARNING - Before You Begin
Read these instructions completely and carefully.
• IMPORTANT - Save these instructions.
• IMPORTANT - Observe all governing codes and ordinances.
We recommend that two people install this product.
Proper installation is the responsibility of the installer.
Product failure due to improper installation is not covered under the Limited Warranty.
You MUST use all supplied parts and use proper installation procedures as described in these instructions when
installing this air conditioner.
Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.
Do not change the plug on the power cord of the air conditioner.
Aluminum house wiring may present special problems - consult a qualifi ed electrician.
When handling the air conditioner, be careful to avoid cuts from sharp metal edges and aluminum fi ns on front
and rear coils. Please wear cut-resistant gloves.
Your air conditioner is designed to install in
standard double hung windows with opening
widths of 23 to 36 inches (584mm to 914mm).
Save carton and these Installation Instructions for future reference. The carton is the best way to store unit
during winter, or when not in use.
NOTE
Table 1
Model 5000 BTU/h 6000 ~ 8000 BTU/h
H 13 in (330 mm) 14 in (356 mm) 15-1/2 in (394 mm)
Wooden Windows
INNER
WINDOW
SILL
INTERIOR
WALL
13.75" min
(349 mm)
23" to 36"
(584 mm
to 914mm)
H
12000 BTU/h
To Next Page
Loading...
Need help?
General
