20
Function Buttons
Before you begin using your new air conditioner, make sure to familiarize yourself with its remote
control. The following is a brief introduction to the remote control itself. For instructions on how to
operate your air conditioner, refer to pages 22-25.
ECO button
Press this button to activate the
Energy saving mode.
Press it again to stop the function
SHORT CUT
Sets and activates your favorite pre-settings.
TEMP
Increases temperature in 1° increments.
Max. temperature is 86°F (30°C).
TIMER ON
Sets timer to turn unit on (see page 24
for instructions)
TIMER OFF
LED
SLEEP
Saves energy during
sleeping hours.
TEMP
Decreases temperature in 1° increments.
Min. temperature is 62°F (17°C).
NOTE: Pressing and holding and
buttons together for 3 seconds will
alternate the temperature display
between the °F & °C scale.
Selects fan speeds in the
following order:
AUTO LOW MED HIGH
MODE
Scrolls through operation
modes as follows:
AUTO COOL DRY
HEAT FAN
NOTE:
Please do not select HEAT
mode if the machine you
purchased is cool-only type.
Heat mode is not supported
by cool-only models.
ON/OFF
FAN SPEED
for instructions)
FAN
ON/OFF
MODE
TEMP
TIMER
ON
SHORT
CUT
SLEEP
TIMER
OFF
ECO LED
Sets timer to turn unit o (see page 24
To Next Page
Loading...
Need help?
General
