14
set the time by touching the slider control (e.g.9), now the timer
you set is 95 minutes.
When the time is set, it will begin to count down immediately.
The display will show the remaining time
When cooking timer expires, the corresponding cooking zone
will be switched off automatically.
The display will show ”H” which means hot;
Setting the timer to turn more than one cooking zones off
a). If more than one heating zone use this function, the timer indicator will show the lowest time.
(e.g. zone 1# setting time of 5 minutes, zone 2# setting time of 15 minutes, the timer indicator
shows “5”.)
NOTE: The red dot next to power level indicator will flash.
(set to 15 minutes)
(set to 5 minutes)
b). Once the countdown timer expires, the corresponding zone will switch off. Then it will show the new
min. timer and the dot of corresponding zone will flash.
c). When cooking timer expires, the corresponding cooking zone will be switch off
automatically.
Note:
a) The red dot next to power level indicator will illuminate indicating that zone is selected.
b) you want to change the time after the timer is set, you have to start from step 1.
3.3.6 Over-Temperature Protection
A temperature sensor equipped can monitor the temperature inside the ceramic hob. When an excessive
temperature is monitored, the ceramic hob will stop operation automatically.
To Next Page
Loading...
Need help?
General
