6 Built-
The standard indoor unit can be controlled by wired controller.

There is a display board with a receiver in the E
in the distance of

The wired controll
detect some failure.
Wired Controller (Standard)
in display board
The standard indoor unit can be controlled by wired controller.
There is a display board with a receiver in the E
in the distance of
2
m. The unit will realized remoter control.
The wired controller and the display board can display the error code or production code when the chips
detect some failure.
Wired Controller (Standard)
The standard indoor unit can be controlled by wired controller.
There is a display board with a receiver in the E
m. The unit will realized remoter control.
er and the display board can display the error code or production code when the chips
Wired Controller (Standard)
The standard indoor unit can be controlled by wired controller.
There is a display board with a receiver in the E
m. The unit will realized remoter control.
er and the display board can display the error code or production code when the chips
Wired Controller (Standard)
The standard indoor unit can be controlled by wired controller.
There is a display board with a receiver in the E
-
box. Move out the display, and fix it in other place, even
m. The unit will realized remoter control.
er and the display board can display the error code or production code when the chips
Remote Controller (Optional)
The standard indoor unit can be controlled by wired controller.
box. Move out the display, and fix it in other place, even
m. The unit will realized remoter control.
er and the display board can display the error code or production code when the chips
Remote Controller (Optional)
box. Move out the display, and fix it in other place, even
er and the display board can display the error code or production code when the chips
Remote Controller (Optional)
box. Move out the display, and fix it in other place, even
er and the display board can display the error code or production code when the chips
Remote Controller (Optional)
box. Move out the display, and fix it in other place, even
er and the display board can display the error code or production code when the chips
box. Move out the display, and fix it in other place, even
er and the display board can display the error code or production code when the chips