Preparation
Page 9
Identification of parts
Storage Instructions
Installation Instructions
NOTE:All the illustrations in the manual are for explanation purpose only. Your machine may be slightly
different. The actual shape shall prevail. The unit can be controlled by the unit control panel .
Preparation
control panel
caster(some units)
handle
air outlet grille
handle
water bucket
air filter (behind the grill)
air intake grille
1. 2.
1. Take out the dehumidifier from the package.
2. Hold the handle and lift the dehumidifier up, pull out the power code, and rotate 90° clockwise.
3. Place the dehumidifier into the water bucket gently according to the ALIGN label until it clicks in place. Do never
install it rudely.
NOTE: During the operation, it is normal if you press the top cover and the dehumidifier shakes slightly.
3.
1. Press in the convex piece in the water bucket.
2. Lift the dehumidifier body handle, rotate 90° clockwise.
3. install the power cord into the in-line slot, put the dehumidifier into the package to store.
1. 2. 3.
Caster installation and disassembly instructions(some units)
Installation:
1.Attach the caster to the bottom of the unit.
2.Use a block to fix it as shown in the picture.
quick glance light
(some units)
To Next Page
Loading...
Need help?
General
