19
Dryer
Safety
Operation
Requirements
Parts and
Features
Installation
Instructions
Dryer Use Dryer Care
Trouble-
shooting
Appendix
DRYER USE
CONTROL PANEL
WARNING
To reduce the risk of fire, electric shock, or injury to persons, read the
IMPORTANT SAFETY INSTRUCTIONS before operating the appliance.
DRYER USE
CONTROL PANEL
WARNING
To reduce the risk of fire, electric shock, or injury to persons, read the
IMPORTANT SAFETY INSTRUCTIONS before operating the appliance.
On/O
Start/Pause
1-Power button
Press to turn your dryer on or into stand-by situation. If your dryer is on for
more than 10 minutes without any buttons being pressed, it automatically turns
into stand-by situation.
2-Start/Pause button
Press to start or pause the program. You can’t change any setting except add a
garment.
3-Cycle selector
Select your desired cycle for the type of load.
The cycle you select determines the heat control for the cycle.
The Normal, Jeans, Perm Press, Quick Dry, My Cycle, Mixed Load, Heavy Duty,
Bulky, Towels, Active Wear, Delicates, Sanitize are Sensor cycles.
Wool, Air Flu, Time Dry, Refresh are Manual cycles.
4-Wrinkle care
Press once to add the wrinkle care step into the operating program. Press again
to cancel selection.
If wrinkle prevent was active, it provides approximately 90 minutes of
intermittent tumbling in unheated air at the end of the cycle to reduce
wrinkling.
The load is already dry, and can be removed at any time during the wrinkle care
cycle.
1
2
3
4
5 6
7
9 8
10
To Next Page
Loading...
Need help?
General