27
Washer
Safety
Operation
Requirements
Installation
Instructions
Washer Use
Washer Care
Troubleshooting
CLEANING THE DOOR GASKET
1. Open the washer door. Using both hands, press down the door gasket.
Remove any foreign objects if found trapped inside the gasket. Make
sure there is nothing blocking the holes behind the gasket.
2. While holding down the door gasket, inspect the interior gasket by
pulling it down with your fingers. Remove any foreign objects if found
trapped inside this gasket. Make sure there is nothing blocking the
holes behind the gasket.
3. When you are finished cleaning the door gasket, remove your hands
and the gasket will return to the operating position.
MOVING, STORAGE AND LONG VACATIONS
Ask the service technician to remove water from drain pump and hoses.
Do not store the washer where it will be exposed to the weather. When
moving the washer, the tub should be kept stationary by using the
shipping bolts removed during installation. See Installation Instructions in
this book.
Be sure the water supply is shut off at the faucets. Drain all water from the
hoses if the weather will be below freezing.
To Next Page
Loading...
Need help?
General