EasyManuals Logo
Home>Midea>Washer>MLH52S7AGS

Midea MLH52S7AGS User Manual

Midea MLH52S7AGS
124 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #32 background imageLoading...
Page #32 background image
32
Washer
Safety
Operation
Requirements
Installation
Instructions
Washer Use
Washer Care
Troubleshooting
Problem Possible Cause What To Do
Door unlocks
or press
Pause/Add
a Garment
and machine
doesn’t
operate
This is normal
Front-load washers start
up differently than top-
load washers, and it takes
30 seconds to check the
system. The door will lock
and unlock.
Incorrect operation
Simply open and close
the door firmly; then
press Pause/Add a
Garment.
Water does
not enter
washer or
enters slowly
Automatic self system
checks
After Pause/Add a
Garment is pressed, the
washer does several
system checks. Water will
flow 60 seconds after
Pause/Add a Garment is
pressed.
Water supply is turned off
Turn on water supply.
Water valve screens are
stopped up
Turn off the water source
and remove the water
connection hoses from
the upper back of the
washer. Use a brush or
toothpick to clean the
screens in the machine.
Reconnect the hose and
turn the water back on.
Wrinkling Improper sorting
Avoid mixing heavy items
(like work clothes) with
light items (like blouses).
Overloading
Load your washer so
clothes have enough
room to move freely.
Incorrect wash cycle
Match cycle selection to
the type of fabric you are
washing (especially for
easy care loads).
Repeated washing in
water that is too hot
Wash in warm or cold
water.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Midea MLH52S7AGS and is the answer not in the manual?

Midea MLH52S7AGS Specifications

General IconGeneral
BrandMidea
ModelMLH52S7AGS
CategoryWasher
LanguageEnglish

Related product manuals