Midea MLV41N1AWWC Service Manual

Service manual for Washing Machine Midea America Company
-------------------------------------------------------------------------------------------------------------------------------------------------------
－ 22 －
Lid locked or will not open.
Press the Start/Pause button to stop your washer. It may
take a few moments for the lid lock to disengage.
Does not drain or spin.
Straighten the drain hoses. Eliminate kinked hoses. If there
is a drain restriction, call for service.
- Close the lid and press the Start/Pause button. For your
safety your washer will not spin unless the lid is closed.
- Check the height of drain hose end.
Fills with wrong temperature
water.
- Turn both faucets fully.
- Make sure the temperature selection is correct.
- Make sure the hoses are connected to the correct faucets.
Flush water lines.
- Disconnect the hoses and clean the screens. The hose
filter screens may be clogged.
Load is too wet at the end of the
cycle.
- Use high efficiency detergent to reduce over-sudsing.
- The load is too small. Very small loads (one or two items)
may become unbalanced and not spin out completely.
Leaks water.
- Make sure all hose connections are tight.
- Make sure the end of the drain hose is correctly inserted
and secured to the drainage system.
- Avoid overloading.
- Use high efficiency detergent to prevent over-sudsing .

Midea MLV41N1AWWC Specifications

General

Brand	Midea
Model	MLV41N1AWWC
Category	Washer
Language	English