12
CLEANING & MAINTENANCE
Always disconnect the clothes washer from the mains power source before
performing any maintenance or cleaning of the appliance.
For optimal performance, regular maintenance and cleaning is highly
recommended.
Regular maintenance and cleaning will extend the service life of the clothes
washer.
Cleaning the outer surface of the washer
To clean the cabinet and control panel, use a damp cloth and wipe dry.
Note: Cleansers such as soap powder, abrasive cleaning power, alkali cleansers,
chemical cloth, thinners, alcohol, acid petroleum products and hot water should not be
used to clean the washer as they may damage the painted cover and plastics.
Clean the water inlet hose joint by
unscrewing and removing the joint
from the washer. Clean the screen
filter gently by using a brush.
Cleaning the lint filter
Be sure to clean the lint filter often
to keep the washer clean. Open the
washer lid and remove the lint filter
from inside the drum. Turn the filter
over and gently clean using water.
Allow to dry before replacing.
Cleaning the water inlet hose
Cleaning the drain pump lint filter
Drain the water from the drain pump. Have a
container in place to catch the drained water.
Open by turning cover anti-clockwise.
Remove the lint filter and gently clean with
water.
Let filter dry before replacing. Align convex with
pump hole.
Replace the pump cover by tightening in a
clockwise direction.
1.
2.
3.
4.
Please check the points below after maintenance:
Ÿ Is there any damage to the power lead?
Ÿ Can the power plug be inserted into the power socket correctly?
Ÿ Do the filters need cleaning?
To Next Page
Loading...
Need help?
General
