Midea RG36C/BGE User Manual

How to use the buttons
99 1010
Cooling /Heating/Fan operation
Ensure the unit is plugged in and power is
available.
1. Press the MODE button to select COOL,
HEAT(cooling & heating models only) or
FAN mode.
2. Press the UP/DOWN buttons to set the
desired temperature.
3. Press the FAN button to select the fan speed
in four steps- Auto, Low, Med,or High.
4. Press the ON/OFF button to start the air
conditioner.
The temperature can
O O O
be set within a range of 17 C~ 30 C in 1 C
increments.
In the FAN mode, the setting temperature is not
displayed in the remote controller and you are not
able to control the room temperature either. In this
case, only step 1, 3 and 4 may be performed.
NOTE
Auto operation
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit starts flashing.
1. Press the MODE button to select Auto.
2. Press the UP/DOWN button to set the
desired temperature. The temperature can
O O O
be set within a range of 17 C~ 30 C in 1 C
increments.
3. Press the ON/OFFbutton to start the air
conditioner.
1. In the Auto mode, the air conditioner can logically
choose the mode of Cooling, Fan, and Heating
by sensing the difference between the actual
ambient room temperature and the setting
temperature on the remote controller.
2. In the Auto mode, you can not switch the fan speed.
It has already been automatically controlled.
3. If the Auto mode is not comfortable for you , the
desired mode can be selected manually.
NOTE
3
1
2
2
MODE
SWING
TEMP
SHORTCUT
FA N
SPEED
TI MER
OF F
RE SET LO CK
LE D
FOLLOW ME
TIMER
ON
TU RBO
SELF CL EAN
DIRECT
SLEEP
FRESH
4
1
2
2
MODE
SWING
TEMP
SHORTCUT
FA N
SPEED
TI MER
OF F
RE SET LO CK
LE D
FOLLOW ME
TIMER
ON
TU RBO
SELF CL EAN
DIRECT
SLEEP
FRESH
3
Dehumidifying operation
Ensure the unit is plugged in and power is
available. The OPERATION indicator on the
display panel of the indoor unit starts flashing.
1. Press the MODE button to select DRY mode.
2. Press the UP/DOWN buttons to set the
desired temperature.
3. Press the ON/OFF button to start the air
conditioner.
The temperature
O O
can be set within a range of 17 C~ 30 C
O
in 1 C increments.
In the Dehumidifying mode, you can not switch the
fan speed. It has already been automatically controlled.
NOTE
Adjusting air flow direction
Use the SWING and DIRECT button to adjust
the desired airflow direction.
1. When push the DIRECT button, the horizontal
louver changes 6 degree in angle for each
push.
2. When push the SWING button, the louver
will swing up and down automatically.
NOTE: When the louver swing or move to a
position which would affect the cooling
or heating effect of the air conditioner,
it would automatically change the
swing/moving direction.
3
1
2
2
MODE
SWING
TEMP
SHORTCUT
FA N
SPEED
TI MER
OF F
RE SET LO CK
LE D
FOLLOW ME
TIMER
ON
TU RBO
SELF CL EAN
DIRECT
SLEEP
FRESH

Midea RG36C/BGE Specifications

General

Brand	Midea
Model	RG36C/BGE
Category	Remote Control
Language	English