Midea RSJ-15 User Manual

9
Installation & Owner‘s Manual
6. OPERATION
6.1 Control Panel Explanation
6.2 Display Explanation
Fig. 6-1
Display
Operation
Fig.6-2
① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨
10
11
12
13 14 1615 17 18 19
11
10
12
13
⑤
⑥
⑦
⑨
⑧
WATER TEMP：
will be
displayed all the time.
shows water temperature on normal time;
shows setting temperature when setting
temperature;
shows unit setting/running parameters,
error/protection code under query mode.
No Icon Description
DISINFECTION:
will be displayed when the unit is in
disinfection mode, otherwise will be
extinguished.
LOCK:
will be displayed if buttons are locked,
otherwise will be extinguished.
ECONOMY MODE:
will be displayed if unit is operating
in Economy Mode. When selecting mode,
will flash with 1Hz frequency if
Economy Mode is selected at the off time.
HYBRID MODE:
will be displayed if unit is operating
in Hybrid Mode. When selecting mode,
will flash with 1Hz frequency if
Hybrid Mode is selected at the off time.
E-HEATER MODE:
will be displayed if unit is operating
in E-heater Mode. When selecting mode,
will flash with 1Hz frequency if
E-heater Mode is selected at the off time.
ALARM:
When unit is displaying protection/error,
will flash with 5Hz frequency as well as
buzzer sounding 3 times every minute until
protection/error eliminated or press for 1
second.
HIGH TEMP:
If target water temp. is higher than 50℃,
will be lightened , otherwise will be
extinguished.
FILL WATER:
will be displayed and flash with 1Hz
frequency when the unit is re-powered on if
the unit was off at last time of power on,
then if press once, will be displayed
without flashing,then press again, will
be extinguished all the time. will not be
displayed when the unit is re-powered on if
the unit was on at last time of power on.
TEMP-UNIT：
will be
displayed if displays temperature,
otherwise will be extinguished.
Table 6-1
①
②
③
AMBIENT TEMP OUTSIDE THE OPERATIONAL
RANGE OF HP:
will be displayed if the ambient temp. is
not in the operating range of the heat pump,
otherwise will be extinguished.
④
WIRE CONTROLLER (Reserved function):
will be displayed if connected to a wire
controller, otherwise will be extinguished.
COMPRESSOR:
will be displayed if compressor is activated,
otherwise will be extinguished.
No Icon Description
E-HEATER:
will be displayed if e-heater is activated,
otherwise will be extinguished.
14

Midea RSJ-15 Specifications

General

Brand	Midea
Model	RSJ-15
Category	Heat Pump
Language	English