Midea Silent Cool 26 Pro User Manual

Maintenance
16
Please check the machine according to the following form before asking for maintenance:
Faults Diagnosis
Problem
Possible Cause
P1 Error Code
In COOL mode: room
temperature is lower than
the set temperature
The air filter is blocked with
dust or animal hair
The unit is low on
refrigerant
Temperature setting is too
high
The windows and doors in
the room are open
The room area is too large
Troubleshooting
Reset the temperature
Unit does not turn
on when pressing
ON/OFF
button
Unit does not cool
well
The unit is noisy
and vibrates too
much
The unit makes a
gurgling sound
Exhaust hose is not
connected or is blocked
The Water Collection Tray is full.
Turn off the unit, drain the water
from the Water Collection Tray
and restart the unit.
There are heat sources
inside the room
Turn off the unit and clean the
filter according to instructions
Call a service technician to inspect
the unit and top off refrigerant
Decrease the set temperature
Make sure all windows and doors
are closed
Double-check the cooling area
Turn off the unit, disconnect the
hose, check for blockage and
reconnect the hose
Remove the heat sources if
possible
The ground is not level
Place the unit on a flat, level
surface
The air filter is blocked with
dust or animal hair
Turn off the unit and clean the
filter according to instructions
This sound is caused by the
flow of refrigerant inside
the unit
This is normal
NOTE: The cabinet and front may be dusted with an oil-free
cloth or washed with a cloth dampened in a solution of
warm water and mildliquid dishwashing detergent. Rinse
thoroughly and wipe dry. Never use harsh cleansers, wax
or polish on the cabinet front. Be sure to wring excess
water from the cloth before wiping around the controls.
Excess water in or around the controls may cause
damage to the unit.
EN

Midea Silent Cool 26 Pro Specifications

General

Type	Monobloc mobile air conditioner
Wi-Fi	No
Noise level	57 dB
Airflow (low speed)	340 m³/h
Airflow (high speed)	425 m³/h
Refrigerating medium	R290
Comfort sleeping mode	Yes
Cooling capacity (max)	9000 BTU/h
Dehumidifying capacity	2.6 l/h
Air conditioner functions	Cooling, Dehumidifying, Ventilating
Cooling temperature range	17 - 35 °C
Suitable for room area up to	25 m²
Cooling capacity in watts (max)	2640 W
Cooling capacity in watts (nominal)	- W
Cooling energy efficiency (EER, W/W)	2.6
Heating energy efficiency (COP, W/W)	-
Current	4.35 A
Connected load	1000 W
AC input voltage	220 - 240 V
Current (cooling)	20 A
AC input frequency	50 Hz
Power consumption (cooling)	1160 W
Energy efficiency class (cooling)	A
Annual energy consumption (cooling)	- kWh
Hourly energy consumption (cooling)	1 kWh
Display type	LED
Product color	White

Weight and Dimensions

Depth	380 mm
Width	455 mm
Height	780 mm
Weight	31100 g
Package depth	480 mm
Package width	535 mm
Package height	885 mm
Package weight	36200 g