Feeding the laundry in
^
Arrange laundry along the feed-in
table so that it is straight and smooth.
^ Then carefully turn the roller by hand
until the laundry makes contact with
the heater plate (keep your fingers
away from the heater plate).
Then:
^ Press the foot pedal down.
Removing the feed-in table
The feed-in table can be removed when
ironing shaped garments, e.g. skirts.
^ First lift it out of the right hand holder,
and then pull it out to the left of the
roller.
Hanging bar
Ironed laundry can be hung over the
swing out bar to avoid creasing.
,
Take care not to press down on
the bar when it is swung out. There
is a danger that this could tip the
ironer over.
Ironing
19
To Next Page
Loading...
Need help?
General
