EasyManuals Logo
Home>Miele>Vacuum Cleaner>Boost CX1

Miele Boost CX1 User Manual

Miele Boost CX1
Go to English
120 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #38 background imageLoading...
Page #38 background image
en
38
Press the footswitch.
If the suction power of the adjustable
floorhead seems too high, reduce the
suction until the floorhead is easier
to manoeuvre (see “Use” – “Regulat-
ing the suction power”).
Adjustable floorhead (Fig.18)
The adjustable floorhead can also be
used for vacuuming the stairs.
Risk of injury caused by falling
vacuum cleaner.
You may be injured if the vacuum
cleaner should fall from the stairs.
When vacuuming stairs, it is best to
start at the bottom of the stairs and
move upwards.
Unwinding the mains cable (Fig.19)
Pull the mains cable out to the re-
quired length.
Insert the plug into the socket.
Risk of damage due to overheat-
ing.
The mains cable may overheat after
a long period of use.
If vacuuming for longer than
30minutes, the cable must be pulled
out all the way.
Rewinding the cable (Fig.20)
Switch off at the wall socket and un-
plug it.
Press the rewind foot switch. The
cable will rewind automatically.
To switch on and off (Fig.21)
Press the On/Off foot control .
During vacuuming
During vacuuming, pull the vacuum
cleaner behind you like a sledge.
To regulate the suction power
The suction power can be regulated to
suit the type of flooring being cleaned.
Reducing the suction power reduces
the amount of effort required to man-
oeuvre the floorhead.
The vacuum cleaner has symbols on
the controls which indicate the type of
use the settings are suitable for.
Curtains, fabric
Cut pile carpets, rugs and runners
Loop pile carpet and rugs
Hard flooring and heavily soiled
carpets and rugs (also for clean-
ing upholstery and mattresses
with the upholstery nozzle)
When using the adjustable floorhead,
if the suction seems too high, reduce
the suction power until the floorhead
is easier to manoeuvre.
Turn the suction power selector to the
power level you require, making sure
it clicks into position (Fig.22).
Opening the air inlet valve (Fig.23)
It is easy to reduce the suction power
for a short time, e.g. to prevent rugs or
other objects being sucked into the va-
cuum cleaner.
Open the air inlet valve on the handle
far enough to reduce the suction
power.

Table of Contents

Other manuals for Miele Boost CX1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele Boost CX1 and is the answer not in the manual?

Miele Boost CX1 Specifications

General IconGeneral
Variable powerYes
Maximum input power890 W
Annual energy consumption- kWh
TypeCylinder vacuum
Cleaning typeDry
Dust capacity1 L
Product colorBlack, Red
Tube materialMetal
Number of wheels3 wheel(s)
Dust container typeDust bag
Number of 360° rotating wheels1 wheel(s)
Proper useHome
Noise level78 dB
Cleaning surfacesCarpet, Hard floor
Country of originChina
Vacuum air filteringAir-clean
Dirt separating methodFiltering
Air filtration stages quantity3
Cord length6.5 m
Control typeRotary
Dust container full indicator-
Vacuum brushes includedUniversal brush
Weight and Dimensions IconWeight and Dimensions
Depth280 mm
Width400 mm
Weight7750 g
Package depth320 mm
Package width590 mm
Package height380 mm
Package weight9130 g

Related product manuals