en
39
The floorhead will be easier to man-
oeuvre.
Setting down and storing the
vacuum cleaner
Risk of electric shock from mains
voltage.
The mains voltage is applied to the
appliance even if it is switched off.
After use, switch the appliance off at
the wall socket and unplug it.
Park system (Fig.24)
Retract the telescopic tube fully.
Slot the floorhead or floorbrush into
the park system from above.
Do not lift the vacuum cleaner by the
dust container carrying handle when
transporting it.
Always use the vacuum cleaner car-
rying handle.
Maintenance
Risk of electric shock from mains
voltage.
The mains voltage is applied to the
appliance even if it is switched off.
Before carrying out any maintenance
work, switch the appliance off at the
wall socket and unplug it.
We recommend using only genuine
Miele accessories bearing the “ORI-
GINAL Miele” logo on the packaging.
Only these will guarantee the optimum
performance of your vacuum cleaner
and the best possible cleaning results.
Please note that faults and damage
caused by use of accessories which
do not bear the “ORIGINAL Miele”
logo on the packaging are not covered
by the vacuum cleaner warranty.
Emptying and cleaning the dust
container(Fig.25–28)
Empty the dust container before the
dust reaches the max marking on the
dust container (Fig.25).
Unlatch the dust container by lifting
the handle upwards (Fig.26).
Remove the dust container.
The contents of the container can be
disposed of with normal household
waste, providing they consist of gen-
eral household dust only.
Hold the dust container close to the
bin to prevent dust from billowing out.
Press the release catch on the bot-
tom of the dust container (Fig.27).
The flap will open and the dust will fall
out.
Clean the dust container using a
slightly damp cloth and mild wash-
ing-up liquid if necessary.
Dry the dust container thoroughly.
Close the flap making sure it clicks
into place.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
