The amount of water used for each
serving of espresso, coffee or hot water
can be set to suit your taste and cup
size.
There is a maximum amount of water
that can be programmed for each type
of drink. The water flow will stop
automatically when the maximum
amount of water has been reached. The
maximum amount of water will the be
saved for that drink.
To program the serving size you can
either:
– use the . or / buttons, or
– select program the amount from the
settings menu.
If there is not enough water in the
water tank, the process will be
stopped and the amount
programmed will not be saved.
Programming the amount
using the . or / buttons
^
Press and hold . or / (as desired) for
approx. three seconds.
^
Place a cup under the coffee
dispensers.
^
Press and hold the . or / until
PROG. THE AMOUNT appears in the
display.
The selected drink will be prepared and
SAVE will appear in the display.
^
Press the OK button when the cup
has been filled to the desired level.
The serving size set will now be
dispensed every time the selected
drink is prepared.
TIP Programming can be canceled as
long as CANCEL appears in the
display.
Setting the serving size
31
To Next Page
Loading...
Need help?
General
