Cleaning and care
43
Grounds container, drip tray,
and drip tray cover
Clean the drip tray and grounds
container every day to avoid
unpleasant smells and mildew.
The grounds container is located in the
drip tray. Water from rinsing also
collects in the grounds container.
A prompt will appear in the display
when the drip tray and/or the grounds
container is full and needs to be
emptied. Empty the drip tray and the
grounds container.
Risk of burns!
If the rinsing process has just
finished, wait a while before
removing the drip tray from the
coffee machine. The water used for
rinsing will continue to run out of the
coffee spouts for a while.
Pull the drip tray carefully out of the
coffee machine. Take the lid off.
Empty the drip tray and grounds
container.
Remove the drip tray cover and
the lower panel.
Clean all parts thoroughly.
Clean the lower panel by hand only
using warm water and dish
detergent.
All other parts are dishwasher-safe.
Clean the inside of the appliance
underneath the drip tray.
Reassemble all parts and place the
drip tray back in the coffee machine.
Make sure the drip tray has been
pushed into the appliance as far as it
will go.
Make sure that the drip tray cover is
correctly installed (see illustration).
Clean the area under the coffee
machine. Water can get under the
appliance when the drip tray is
removed.
To Next Page
Loading...
Need help?
General
