Cleaning and care
59
Replace the dispensing unit onto the
central spout.
Replace the stainless steel cover and
connect the milk pipework if required.
Useful tip: The “seam” on the milk
pipework and on the central spout
makes it easier to assemble.
Cleaning the steam jet
Clean the steam jet once a month.
Push the central spout right down
and remove the stainless steel cover
by pulling it off toward you.
Remove the dispensing unit toward
the front.
Push the cleaning brush a maximum
of 3/8"(1cm) into the steam jet.
Clean the steam jet with the cleaning
brush.
Push the dispensing unit back into
the central spout and replace the
stainless steel cover.
Cleaning the milk pipework
and rinse valve
Risk of damage due to incorrect
cleaning.
The silicone plug can be damaged
by pointed objects, e.g., also the
cleaning brush, and stop working.
Do not use pointed objects, e.g., a
needle, for cleaning.
Only clean the silicone plug under
running water and/or in the
dishwasher. Do not use the cleaning
brush supplied with the appliance.
Clean the rinse valve and milk pipework
once a week.
To Next Page
Loading...
Need help?
General
