Miele descaling tablets are available to
order from Miele or via the internet at
www.miele-shop.com (depending on
country).
You will need 1 descaling tablet to
descale the machine.
^
Fill the water container to the marker
F with lukewarm water.
^
Place 1 descaling tablet in the water.
Ensure that you adhere to the mixing
ratio for the descaling tablets. It is
important that you do not fill the
water container with too much or too
little water than prescribed. The
descaling programme will otherwise
be cancelled prematurely.
Carrying out descaling
^ Push the water container back into
the appliance.
^ Follow the further instructions given in
the display.
When "Fill the water container with fresh
tap water up to the descaling symbol
F" appears in the display:
^
Carefully rinse the water container
with clean water. Ensure that no
descaling solution residue remains in
the water container. Fill the water
container to the F symbol with fresh
tap water.
The descaling programme is finished at
the end of the rinsing cycle and drinks
can be made again.
To protect the machine and
surrounding surfaces from damage,
make sure you wipe up any
spillages or splashes of descaling
agent immediately.
The water container and the drip tray
should be cleaned carefully after
descaling in order to remove any
descaling residue.
Descaling when not prompted
by a message
^
Touch x.
^
Select "Maintenance" and touch OK.
^
Select "Descale the appliance".
The descaling programme cannot
be cancelled once you have touched
OK. The programme has to be
completed through to the end.
^
Touch OK.
The descaling programme will begin.
Descaling the machine
59
To Next Page
Loading...
