EasyManuals Logo
Home>Miele>Vacuum Cleaner>Complete C3

Miele Complete C3 User Manual

Miele Complete C3
Go to English
160 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #56 background imageLoading...
Page #56 background image
en
56
bAirClean Plus 50 (light blue)
Replace this filter after approx. one
year. Make a note of the date on the fil-
ter.
cActive AirClean 50 (black)
dHEPA AirClean 50 (white)
Replace this filter when the exhaust fil-
ter TimeStrip change indicator is com-
pletely red (dia. 17). The indicator lights
up after approximately 50 hours of op-
eration, which is equivalent to about a
year of average use. You can continue
vacuuming when the light comes on.
However, the suction power will be re-
duced as will the effectiveness of the fil-
ter if it is not replaced in good time.
How to replace the AirClean filter
(dia. 41 + 42)
Do not use more than one exhaust fil-
ter at a time.
Open the dust compartment lid.
Press the release catch on the filter
grille and open the grille until it clicks.
Grasp the used AirClean filter by one
of the clean, unsoiled sections and
take it out.
Replace it with a new AirClean ex-
haust filter.
If you wish to fit an AirClean
Plus50,Active AirClean 50 or HEPA
AirClean 50 filter, see "Replacing one
type of exhaust filter with another".
Close the filter grille.
Close the dust compartment lid.
Replacing the AirClean Plus 50,
Active AirClean 50 and
HEPA AirClean 50 exhaust filters
(dia. 43 + 44)
Do not use more than one exhaust fil-
ter at a time.
Open the dust compartment lid.
Lift the exhaust filter and remove it.
Insert a new exhaust filter, making it
sure it goes in properly, then push it
down into position.
If you are using exhaust filter c or d,
press the exhaust filter TimeStrip
change indicator (dia. 15).
After approx. 10 - 15 seconds, a thin
red line will appear in the left hand side
of the display for both exhaust filters
(dia. 16).
If you wish to fit an AirClean filter,
see "Replacing one type of exhaust
filter with another".
Close the dust compartment lid.
Replacing one type of exhaust filter
with another (dia. 12)
Depending on model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters:
a AirClean
b AirClean Plus 50 (light blue)
c Active AirClean 50 (black)
d HEPA AirClean 50 (white)
Do not use more than one exhaust fil-
ter at a time.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele Complete C3 and is the answer not in the manual?

Miele Complete C3 Specifications

General IconGeneral
BrandMiele
ModelComplete C3
CategoryVacuum Cleaner
LanguageEnglish

Related product manuals