^
Press on the ribbed position a, and pull the capsule plate
b forwards to remove it.
^
Fill a small container with hot water and dissolve one
cleaning tablet in it.
^
Then place the capsule plate in the container and leave for
approx. 1 hour.
^ Once the coffee remains have been removed, rinse it
thoroughly and dry it.
^ Push the capsule plate back into the machine. It must click
into position.
Steam valve
The small rubber sleeve which connects the steam valve with
the milk frother can be removed for cleaning. The sleeve and
also the tip of the steam valve underneath the sleeve should
be cleaned regularly.
^
Push the steam valve down and pull the rubber sleeve off
downwards.
^
Use a mild solution of hot water and washing-up liquid to
clean the rubber sleeve and the tip of the steam valve.
Cleaning and care
57
To Next Page
Loading...
Need help?
General
