The lines must be rinsed daily
before the first use. This will happen
automatically if "Rinse automatic" is
set to "On" (see "Settings - Rinse
Automatic") and the machine is cold.
After heating, hot water runs out of
the two spouts into the drip tray. If
"Rinse automatic" was set to "Off",
use "Care" to rinse the lines. See
"Cleaning and Care - Rinse".
Turning on
^
Select the "On/Off" touch control.
A reminder to fill the water tank with
fresh water is displayed.
i
Please fill and reinsert
the water tank
Then the upper line in the display
shows:
Preheating
+ DESCALING
+ USER PROFILE: STANDARD
+ SETTINGS F ...
If "Rinse automatic" is set to "On"
(default), the machine rinses after the
heating phase and the main menu is
displayed.
Making coffee
12
To Next Page
Loading...
Need help?
General
