Main dispenser
Clean the stainless steel cover of the
main dispenser by hand only, using
warm water and some dishwashing
liquid. All other components are
dishwasher safe.
^ Pull the main dispenser all the way
down a and pull the cover forward to
remove b.
^
Push the snap-in clip slightly up a,
seize the grip of the dispensing unit
and pull it out towards the front b.
^
Release the dispenser by seizing it
by the sides of the magnet and
pulling it to the front.
^
Turn the top connecting piece a and
pull it off to the top. Also pull the
bottom connecting piece b off to the
top.
^
Pull off the dispensing nozzles c.
Do not remove the Y-piece.
^
Thoroughly clean all components.
Cleaning and care
49
To Next Page
Loading...
Need help?
General
