Changing a halogen lamp
Before any cleaning or maintenance
work, disconnect the cooker hood
from the mains supply. Ensure that
– it is switched off at the wall socket
and the plug is withdrawn, or
– the fuse is withdrawn from the
fused spur connection unit, or
– the mains fuse is withdrawn,or
– the screw-out fuse is removed
(in countries where this is
applicable).
Exercise caution when changing
halogen lamps. They get very hot
during use, and remain hot for some
time after being switched off. Do not
touch the surface directly when
changing a lamp, as grease
particles from your fingers will
adhere to the surface and damage
it. Please follow the manufacturer’s
instructions.
^
First remove the grease filters from
the cooker hood.
^
Now turn the thumb screw
anti-clockwise. This releases the
halogen lamp partially from its
housing.
^
Turn the halogen lamp anti-clockwise
and pull it downwards to remove.
Replace with a halogen lamp of the
same specification:
GU/GZ 10, 230 V, 50 W.
^
Fit the new halogen lamp by
reversing the above procedure.
^
Replace the grease filters.
Cleaning and care
17
To Next Page
Loading...
Need help?
General
