Miele G 1102 SCi User Manual

Switching on
^
Make sure the spray arms are not
obstructed.
^
Close the door.
^
Open the stopcock, if it is closed.
^
Switch the dishwasher on with the
On/Off button K.
The Start/Stop indicator light flashes
and the indicator light comes on next to
the last programme selected.
Selecting a programme
Choose your programme according to
the type of load and how dirty it is.
The different programmes and their
uses are described in the Programme
Chart later on in this booklet.
Starting a programme
^
Select the programme required with
the programme selector button.
The indicator light next to the selected
programme will come on.
^
Press the Start/Stop button.
The programme will begin. The
Start/Stop and the Wash/Rinse indicator
lights and the indicator light next to the
programme selected all light up.
A programme can only be cancelled
in the first few minutes. Otherwise
the programme must continue to the
end so that important programme
stages (e.g. reactivating the water
softener) are not omitted.
Programme sequence
indicators
After a programme has been started
the current stage of the programme is
indicated by the programme sequence
indicator lights.
Operation
31

Miele G 1102 SCi Specifications

General

Brand	Miele
Model	G 1102 SCi
Category	Dishwasher
Language	English