Switching on
^
Make sure the spray arms are not
obstructed.
^
Close the door.
^
Open the stopcock, if it is closed.
^
Switch the dishwasher on with the
On/Off button s.
The Start/Stop indicator light flashes
and the indicator light comes on next to
the last programme selected.
Selecting a programme
Choose your programme according to
the type of load and how dirty it is.
The different programmes and their
uses are described in the Programme
Chart later on in this booklet.
Starting a programme
^
Select the programme required with
the programme selector button.
The indicator light for the programme
selected comes on.
The programme duration will appear in
hours and minutes in the Time display.
You can now select an additional
function (see "Additional functions").
^
Press the Start/Stop button.
The programme will begin. The
indicator lights for "Start/Stop",
"Wash/Rinse" and the programme
selected will light up.
If the "Turbo" and/or "Combi tab" extra
options have been selected the
relevant indicator light(s) will also come
on.
A programme can only be cancelled
in the first few minutes. Otherwise
the programme must continue to the
end so that important programme
stages (e.g. reactivating the water
softener) are not omitted.
Operation
33
To Next Page
Loading...
Need help?
General
