Operation
47
At the end of the programme
The signal tones may sound at the end
of the programme (see “Programme
options - Signal tones”).
The programme has ended when :
appears in the display.
The drying fan may continue to run for
a few minutes at the end of the
programme.
Risk of damage due to steam.
Steam from the dishwasher could
damage the edges of delicate
worktops when you open the door at
the end of the programme if the fan
is no longer running.
At the end of a programme, you can
either open the door fully (do not
leave it partially open) or leave it
closed until you are ready to unload
the crockery.
Energy management
To save energy, the dishwasher will
switch off automatically 10minutes
after the last time a button is pressed or
after the end of a programme.
You can switch the dishwasher back on
with the button.
The dishwasher will not switch itself
off while a programme is running or if
there is a fault.
To Next Page
Loading...
Need help?
General
