Cleaning the spray arms
Particles of food can get stuck in the
spray arm jets and bearings. The spray
arms should therefore be inspected
and cleaned regularly (approx. every
4 - 6 months).
^
Switch the dishwasher off before
-
hand.
Remove the spray arms as follows:
^
Take out the cutlery tray (if your dish
-
washer is fitted with one).
^
Press the top
spray arm upwards to
engage the inner ratchet. Then un-
screw the spray arm.
^
Lift up the middle
spray arm a to en
-
gage the ratchet. Then unscrew the
spray arm b.
^
Remove the lower basket.
^ Pull the lower
spray arm firmly up-
wards to remove it.
^
Use a pointed object to push food
particles into the spray arm jets.
^
Rinse thoroughly under running wa
-
ter.
^
Replace the spray arms and check
that they rotate freely.
Cleaning and care
39
To Next Page
Loading...
Need help?
General
