Miele G 7200 User Manual

Cleaning and care
71
Inserting the upper spray arm
 Refit the upper spray arm and tighten
it by hand.
Inserting the middle spray arm
 Replace the middle spray arm and
turn the screw thread anticlockwise
until it engages. Make sure that the
recesses in the lock line up.
Inserting the lower spray arm
 Refit the lower spray arm and ensure
that the filter combination lies flat in
the base of the wash cabinet.
 Rotate the screw thread of the lower
spray arm clockwise until the arrow in
the viewing window points to the lock
symbol.
 Make sure the spray arms can rotate
freely.
 Damage due to soiling entering
the circulation system.
The lower spray arm is used to se-
cure the filter combination. Without
filters, coarse soiling can enter the
circulation system and cause a
blockage.
Do not run a wash programme
without the lower spray arm or
without the filters.
Inserting the cutlery tray (if present)
 Slide the cutlery tray back onto the
rails from the front.
 Replace the safety clips in the rails on
both sides of the cutlery tray.

Miele G 7200 Specifications

General

Type	Freestanding
Capacity	14 place settings
Noise Level	44 dB
Drying System	AutoOpen drying
Control Type	Electronic
Control Panel Colour	Stainless Steel
Door Colour	Stainless Steel
Size	Full-size
Number of Washing Programs	6
Drying Class	A
Water Consumption per Cycle	8.9 litres
Dimensions	60 cm (width) x 60 cm (depth) x 84.5 cm (height)