Miele G 7362 - Remote Control

Settings
38
Reset
This menu option only appears if you
have already connected your dish-
washer to your WiFi network.
You can use this menu option to reset
all WiFi module settings to the factory
default settings.
The network configuration should be re-
set whenever a dishwasher is being dis-
posed of or sold, or if a used dish-
washer is being put into operation. This
is the only way to ensure that all per-
sonal data has been removed and the
previous owner will no longer be able to
access the dishwasher.
 Select the Reset menu option and
confirm with OK.
Remote control
This menu option will only be dis-
played if you have connected your
dishwasher to your WiFi network (see
“Settings” chapter, “Miele@home”
section)
If you wish to permanently switch off
the Remote controloption, you can do
this under this menu option. The
sensor control will then no longer be
available to select until you change this
setting again.
Even if the Remote controloption is
switched off, you can use Miele to call
up information about your appliance.
However, you cannot start any pro-
grammes or change any settings from
it.