Operation
54
Energy management
To save energy, the dishwasher will
switch off automatically 10 minutes
after the last time a button has been
pressed or 10 minutes after the end of
the programme (see "Programme
options - Optimise standby").
Press the button to switch the
dishwasher back on.
The dishwasher will not switch off
whilst a programme is running, during
the Delay start period or if there is a
fault.
Programme finished
The programme has ended when .
appears in the display.
The drying fan may continue to run for
a few minutes at the end of the
programme.
The dishwasher can now be opened
and unloaded (see "Unloading the
dishwasher").
To prevent the risk of steam
damage to the worktop edging
above the dishwasher, it is advisable
to leave the door closed until you are
ready to unload the crockery.
Alternatively, you can open the door
fully until the crockery is cool enough
to unload. Do not leave the door only
partially open.
To Next Page
Loading...
Need help?
General
