Miele G4500SCI User Manual

Water inlet/drain fault
Problem Possible cause Remedy
The Inlet/Drain check
indicator flashes.
The stopcock is
closed.
Open the stopcock fully.
The dishwasher stops
during a programme.
The Inlet/Drain
indicator flashes.
Before rectifying the problem:
–
Switch the dishwasher off
using the On/Off button K.
Water intake is
restricted.
–
Open the stopcock fully.
–
Clean the water inlet filter
(see "Maintenance").
–
The water pressure at the
intake is lower than 30 kPa
(0.3 bar).
Seek professional advice.
The water outlet is
restricted, water
remains in the wash
cabinet at the end of a
programme.
– Clean the filter combination.
See "Cleaning and care".
– Clean the drain pump. See
"Maintenance".
– Clean the non-return valve.
See "Maintenance".
– Remove any kink in the drain
hose.
Problem solving guide
41

Miele G4500SCI Specifications

General

Brand	Miele
Model	G4500SCI
Category	Dishwasher
Language	English