At the end of the time a beep sounds
three times and the
AUTO
symbol
flashes.
Press any button to cancel the beep.
The heating and the oven lighting go
out.
If the food is still not cooked:
set a new time,
and press the Start/Stop button.
Switching off the appliance
The cooling fan prevents the build-
up of condensation in the warm ap-
pliance. Leave the cooling fan on
until the oven has cooled down suffi-
ciently.
Turn the function selector and the
temperature selector to "0", and this
will also turn off the cooling fan.
Grill
Turn the function selector to Grill J.
The cooling fan works and the oven in-
terior lighting is switched on.
The appliance automatically offers a
grill temperature which cannot be
changed.
The grill begins to heat up. The indica-
tor light on the control panel stays on
while the appliance is heating up.
Switching on the timer
You can switch the timer on at any time
to determine the length of time the grill
should be on. At the end of this period
the grill and the oven interior lighting
switch off.
Press the g button.
For approx. 4 seconds 0
•
00 ap-
pears in the display.
Within these 4 seconds use the + or –
button to set the required time.
The oven interior light and the heat-
ing will go out as soon as you press
the + or – button.
At the left side of the display
AUTO
flashes.
Using conventional functions
26
To Next Page
Loading...
Need help?
General
