Appliance front and control
panel
Clean the door handle and the control
elements regularly, preferably after
each use. This will help to prevent
grease and other deposits adhering to
surfaces and becoming difficult to
remove.
^
All external surfaces and controls can
be cleaned using warm water with a
little washing-up liquid applied with a
soft sponge or cloth.
^
Wipe the surfaces dry using a soft
cloth.
E-Cloth
A microfibre "E-Cloth" is available from
the Miele UK Spare Parts Department,
which is suitable for cleaning surfaces
such as stainless steel, glass, plastic
and chrome without the use of
chemicals.
To prevent the risk of scratches and
damage to the surface structure of
glass, stainless steel and aluminium
fronted appliances, pay particular
attention to the following cleaning
instructions.
Glass fronted appliances
The appliance front and controls are
susceptible to scratches and
abrasions.
Avoid:
–
abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
–
abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents,
–
oven sprays.
Aluminium fronted appliances
Aluminium is affected by the way that
light falls on it, by the surrounding
environment and by the angle you
observe it from.
Aluminium surfaces and controls
may suffer discolouration or damage
if soiling, acids or alkaline
substances are left on them for too
long.
Remove these straight away.
The appliance front and controls are
susceptible to scratches and
abrasions.
Avoid:
–
cleaning agents containing soda,
acids or chlorides,
–
abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
–
abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents,
–
stainless steel cleaners,
–
cleaning agents containing
descaling agents,
–
dishwasher detergent,
–
oven sprays.
Cleaning and care
47
To Next Page
Loading...
Need help?
General
